Div. B › Part 7 › 7.3 › 7.3.3 — Joints and Connections

7.3.3.8 — Connection of Floor Outlet Fixtures

Copied!
(1) Every pedestal urinal, floor-mounted water closet or S-trap standard shall be connected to a fixture drain by a floor flange or other means of connection, except that a cast iron trap standard may be caulked to a cast iron pipe.
(2) Except as provided in Sentence (3), every floor flange shall be of brass.
(3) Where cast iron or plastic pipe is used, a floor flange of the same material may be used.
(4) Every floor flange and fixture shall be securely set on a firm base and fastened to the floor or trap flange of the fixture.
(4.1) Every joint in a floor flange or between a fixture and the drainage system shall be sealed with a resilient, watertight and gas-tight seal.
(5) Where a lead water closet stub is used, the length of the stub below the floor flange shall be at least 75 mm.
Disclaimer. This site provides general access to Ontario Building Code information for reference only. It is not an official source and may omit or summarize content. Always verify requirements with the current OBC and your Authority Having Jurisdiction (AHJ). The Ontario Building Code is Crown copyright © King’s Printer for Ontario. Terms of Use.