3.5.1.1 — Scope

(1) Manual emergency recall shall be provided for all elevators serving storeys above the first storey. (2) Key-operated switches for emergency recall described by Sentence (1) shall be provided in a conspicuous location at, (a) each elevator lobby on the recall level, and (b) the central alarm and control facility required in Article 3.2.6.7. (3) In-car emergency service switches shall be provided in all elevator cars. (4) Keys to operate the switches required by Sentences (2) and (3) shall be, (a) provided in a suitably identified box conspicuously located on the outside of an elevator hoistway near the central alarm and control facility required by Article 3.2.6.7., and (b) kept at the central alarm and control facility. (5) In a building that is not sprinklered, automatic emergency recall operation shall be provided for all elevators serving storeys above the first storey. (6) The automatic emergency recall feature in Sentence (5) shall be actuated by, (a) smoke detectors installed in each elevator lobby on each storey, or (b) the building fire alarm system. (7) Smoke detectors in Sentence (6) shall be designed as part of the building fire alarm system.

(1) At least one elevator shall be provided for use by firefighters in conformance with Sentences (2) to (6). (2) The elevator referred to in Sentence (1) shall have a useable platform area not less than 2.2 m2 and shall be capable of carrying a load of 900 kg to the top floor that it serves from a landing on the storey containing the entrance for firefighter access referred to in Articles 3.2.5.4. and 3.2.5.5. within 1 min. (3) Except where Measure K of MMAH Supplementary Standard SB-4, “Measures for Fire Safety in High Buildings”, is used, each elevator for use by firefighters shall, (a) be provided with a closure at each shaft opening so that the interlock mechanism remains mechanically engaged and electrical continuity is maintained in the interlock circuits and associated wiring for a period of not less than 1 h when the assembly is subjected to the standard fire exposure described in CAN/ULC-S104, “Fire Tests of Door Assemblies”, (b) be protected with a vestibule containing no occupancy and separated from the remainder of the floor area by a fire separation having a fire-resistance rating not less than 45 min, or (c) be protected with a corridor containing no occupancy and separated from the remainder of the building by a fire separation having a fire-resistance rating not less than 1 h. (4) Except as permitted in Sentence (5), an elevator referred to in Sentence (1) shall be capable of providing transportation from the storey containing the entrance for firefighter access referred to in Articles 3.2.5.4. and 3.2.5.5. to every floor that is above grade in the building and that is normally served by the elevator system. (5) If it is necessary to change elevators to reach any floor referred to in Sentence (4), the system shall be designed so that not more than one change of elevator is required when travelling to any floor in the building from the storey containing the entrance for firefighter access referred to in Articles 3.2.5.4. and 3.2.5.5. (6) Electrical conductors for the operation of the elevator referred to in Sentence (1) shall be, (a) installed in service spaces conforming to Section 3.6. that do not contain other combustible material, or (b) protected against exposure to fire from the service entrance of the emergency power supply, or the normal service entrance of the normal power supply, to the equipment served, to ensure operation for a period of 1 h when subjected to the standard fire exposure described in CAN/ULC-S101, “Fire Endurance Tests of Building Construction and Materials”.