Div. B › Part 9 › 9.29 › 9.29.6 — Plywood Finish

9.29.6.1 — Thickness

Copied! ▲ ▼
(1) Except as provided in Sentences (2) and (3), the minimum thickness of plywood interior finish shall conform to Table 9.29.6.1.
(2) A manufacturing tolerance of -0.4 mm may be applied to the thicknesses listed in Table 9.29.6.1.
(3) No minimum thickness is required where plywood is applied over continuous backing.
Tables & Figures referenced
Table 9.29.6.1 : Thickness of Plywood Interior Finish : Forming Part of Articles 9.29.6.1., 9.29.6.2. and 9.29.9.2.
Loading Table 9.29.6.1…
Disclaimer. This site provides general access to Ontario Building Code information for reference only. It is not an official source and may omit or summarize content. Always verify requirements with the current OBC and your Authority Having Jurisdiction (AHJ). The Ontario Building Code is Crown copyright © King’s Printer for Ontario. Terms of Use.